FAQ

The reason why we dropped the end bolt is this:

- if someone uses single speed - we really suggest using a bolt thru axle - such as Rotary SS; in this case you don't need ANY tensioners; the bolts will hold the hub securely in place; Also, you can easily tighten the chain by hand.

- if  someone uses gears, then there are TWO kinds of forces acting on the axle - pushing towards the BB (from pedaling forces) and pulling the       other way (from braking); therefore the end bolt will only help in one direction, but if the axle is not properly secured as then the       hub will move anyway (to the back) when braking hard.

Please look up the hub that you are interested in on our website, and there you will find all the info for spoke calculators. One of them that you can use is on www.dtswiss.com

Our bikes are made with high quality 4130 steel tubes provided by TANGE. The tubes are molded and butted to our very special spec providing the maximum strength where it is needed most.

The RNS has a 1,1/8" size steerer tube and runs 100x10mm front hub only.

Of course! There are replaceable dropout tabs that enable to switch between the standards. The aftermarket Soda frames got the adapters included. If you don’t have them though,  you can order them through your local NS Bikes dealer/distributor.

As long as you don? cut them in a crazy way that damages the tube, the warranty will be no problem.

Are you really sure that you are:

1. Tightening your QR's properly?

2. Tightening the securing bolts in the axle positioners properly?

If you are doing both, there should be no problem. But remember for single speed we always suggest THRU-AXLE HUBS (such as Rotary SS). This way you can get even more clamping force.

Please contact your local distributor, send them a stamped self addressed envelope with a note saying that you want some NS Bikes stickers and we are sure they will be happy to send some to you free. You can also buy a big sticker pack from your local NS Bikes dealer.

The distributor in your country is authorized for sponsoring. Please contact them. You will find contact info in the “Distributors” section on this site

Please go to the distributors section on our site. There you will find all the contact info to all our distributors, who can serve your needs. If your country does not have a distributor, please contact us or visit shop.nsbikes.com

Yes! The construction is strong enough for grinding. For better performance remove the pins from one side of the pedal. But remember that after some strong grinds you may have trouble fitting them again. Pedals as well as pegs wear off after intense grinding - the warranty doesn't cover that.

Majesty, Decade & Suburban frames can be used with rear derailleur however you need to order a special derailleur hanger.

Soda Slope frame comes with a replaceable derailleur hanger in the box. Capital frame is a singlespeed only frame to be used with bmx hubs (110x14).

We can give a green light for painting, but under certain conditions. Treatments like sandblasting, oven heating etc will void the warranty.

If you sandblast a frame you remove some of the metal, and this can damage tubes and welds. Excessive heat can also effect the tubes. So if you want to repaint your frame, be really careful about this - preferably consult a specialist.

You can run pegs on the Capital frame.

We are able to sell direct only to customers who have no NS Bikes distributor in their country. In other countries we have distributors who carry our stuff, and we will not sell direct to any individual customers in those regions. In order to buy directly please visit our on-line shop: http://shop.nsbikes.com/

Please use our contact form and choose “Sales” department and drop us a line.

You can use tubeless system in following rims and wheelsets: Enigma Dynamal Roll and Enigma Dynamal.

All NS products carry a 1 year crash replacement meaning that our customers can buy a new part for 50% of the original price if he/she damages his/her product due to hard riding or crashing (not due to manufacturing defects). Please contact your distributor in order to proceed with the crash replacement of your NS product.

You can run a double crown in Fuzz and Soda Evo frames.

Eccentric Djambo (high clamp only, top pull), Snabb E/T/Plus (Low direct mount S3 only), Surge Evo (top pull 34.9 high clamp only), Clash (top pull 34.9) , Clash Jr (top pull 34.9),

NS frames will fit the following tire sizes. Please note that some bikes fit in different wheel sizes.

For example: Eccentric Cromo 29 will fit 29 or 27.5+ tires.

24” x 2.2”: Capital 24”

24” x 2.4”: Majesty Park, Clash Jr

26” x 2.2: Capital 26

26” x 2.3”: Suburban, Majesty Park

26” x 2.35”: Clash

26” x 2.4”: Majesty Dirt, Decade, Movement, Liar, Soda Slope

26” x 2.6”: Surge Evo,

27.5” x 2.2: RAG+

27.5” x 2.3”: Snabb T

27.5” x 2.35”: Eccentric Alu Evo 27.5

27.5” x 2.6”: Fuzz, Soda Evo

27.5” x 3.0: Eccentric Cromo 29, Eccentric Djambo Evo, Snabb Plus

29” x 2.3”: Eccentric Cromo 29, Eccentric Djambo Evo, Snabb Plus

700c x 40mm: Analog, RAG+

IS 42: Capital, Suburban,

IS 42/52: Snabb E, Snabb T, Snabb Plus, Majesty, Decade, Eccentric Cromo, Eccentric Alu Evo, Eccentric Djambo Evo, Soda Evo, Soda Slope, Surge Evo, RAG+

ZS44/ZS56: Snabb E Carbon, Fuzz

BB92 Press fit: Snabb E Carbon,

BB 73 threaded: Snabb E, Snabb T, Snabb Plus, Surge Evo, Eccentric Cromo, Eccentric Alu Evo 27.5, Eccentric Djambo, Soda Evo, Soda Slope, Clash, Clash Jr, Liar, RAG+

BB 83 threaded: Fuzz

BB 68 spanish: Majesty Dirt & Park, Capital

BB 68 euro: Suburban

31.6 / 34.9: Snabb E Carbon, Snabb E, Snabb T, Snabb Plus,

30.9 / 34.9: Fuzz, Decade, Soda Slope, Soda Evo, Surge Evo, Eccentric Cromo, Eccentric Alu Evo 27.5, Eccentric Djambo, Clash, Clash Jr, Liar

27.2 (integrated seat clamp): Majesty Dirt & Park, Suburban,

27.2/32: RAG+

25.4: Capital (integrated seatpost clamp),